2009 Hyundai I10

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS

Offside Rear bump stop insecure in side spring

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords 165/60/14 (5.2.3 (d) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords 165/60/14 (5.2.3 (d) (i))

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge 165/60/14 (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge 165/60/14 (5.2.3 (e))

Central Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Lower Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Service brake binding but not excessively both (1.2.1 (f))

Offside Rear hand brake effort on minimum

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear hand brake effort on minimum

Offside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge worn to limit on inside edge (5.2.3 (e))

Front Brake disc significantly and obviously worn both (1.1.14 (a) (i))

Offside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge worn to limit on inside edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front registration plate deteriorated but not likely to be misread (6.3.1d)

High level brake light inop

Vehicles internal headlight adjuster altered to recheck lights ()

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

High level brake light inop

Vehicles internal headlight adjuster altered to recheck lights ()

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Centre Stop lamp not working (1.2.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Stop lamp not working (1.2.1b)

n/s/f tyre low inner edge

o/s/f tyre bald inner edge

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)