2011 Ford Focus

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Exhaust mounting defective (6.1.2 (a))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust mounting defective front brackets broke (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread cracked (0.1 (b))

Tyre worn close to legal limit/worn on edge both fronts (5.2.3 (e))

exhaust flexi deteriorated

exhaust heatshields slightly loose rear

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases centre (6.1.2 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Exhaust mounting defective front brackets broke (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread cracked (0.1 (b))

Tyre worn close to legal limit/worn on edge both fronts (5.2.3 (e))

exhaust flexi deteriorated

exhaust heatshields slightly loose rear

Emissions unable to be completed (8.2.1.2 (d))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Anti-roll bar linkage likely to fail (5.3.3 (b) (ii)) DANGEROUS

Nearside Headlamp not working on main beam and insecure (4.1.1 (a) (ii))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

head lamp converters fitted

under tray fitted

headlamp converters fitted

undertrey fitted

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components