MOT Status
ValidMileage
136,292 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Windscreen damaged but not adversely affecting driver's view Chip in Screen (3.2 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Windscreen damaged but not adversely affecting driver's view Chip in Screen (3.2 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Windscreen damaged but not adversely affecting driver's view Chip in Screen (3.2 (a) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Windscreen damaged but not adversely affecting driver's view Chip in Screen (3.2 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Windscreen damaged but not adversely affecting driver's view Chip in Screen (3.2 (a) (i))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps Both (4.7.1 (b) (ii))
Windscreen damaged but not adversely affecting driver's view Chip in Screen (3.2 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge Heavily worn Inside and Outside Edges/Shoulders (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge Heavily worn Inside and Outside Edges/Shoulders (5.2.3 (e))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Windscreen damaged but not adversely affecting driver's view Chip in Screen (3.2 (a) (i))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
All suspension components corroded
Both front tyres worn smooth on inner/outer edges
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
chip in windscreen
Both front tyres worn on inner/outer edges
No emissions print out due clean emissions
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EF61 YMD is a 2012 Mazda 6 in Red with a 2,183cc diesel engine. This vehicle has been through 15 MOT tests with a personal pass rate of 80%.
Across all 2012 Mazda 6 models, the average MOT pass rate is 78.0% with a typical mileage of 74,301 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying EF61 YMD, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 14 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of EF61 YMD?
You can check the full history of EF61 YMD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EF61 YMD registered?
EF61 YMD is a 2012 Mazda 6, first registered on 14 January 2012.
Is EF61 YMD safe to buy?
The MOT history for EF61 YMD shows 15 tests with a 80% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EF61 YMD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EF61 YMD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.