MOT Status
ExpiredMileage
101,330 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
engine management light on
Offside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Headlamp aim too low (1.8)
engine management light on
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Offside Front constant velocity joint is insecure (2.5.C.1b)
Offside Front wheel bearing rough when rotated (2.5.A.2)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Oil leak
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Serious engine oil leak.
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Registration plate lamp not working (1.1.C.1d)
Serious engine oil leak.
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Inner Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Headlamp aim too high (1.8)
Offside Inner Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Registration plate lamp not working (1.1.C.1d)
Rear Exhaust system not adequately supported (7.1.1)
Front Brake pad(s) wearing thin (3.5.1g)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Direction indicator incorrect colour (1.4.A.2f)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too low (1.8)
Nearside Rear Direction indicator incorrect colour (1.4.A.2f)
Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Side repeater incorrect colour (1.4.A.2f)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim beam image kick up to the offside (1.8)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Side repeater slightly discoloured (1.4.A.2f)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Front brake disc slightly scored (3.5.1h)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EJ03 EXA is a 2003 Peugeot 206 in Black with a 1,997cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 63.2%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying EJ03 EXA, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of EJ03 EXA?
You can check the full history of EJ03 EXA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EJ03 EXA registered?
EJ03 EXA is a 2003 Peugeot 206, first registered on 29 April 2003.
Is EJ03 EXA safe to buy?
The MOT history for EJ03 EXA shows 19 tests with a 63.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EJ03 EXA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EJ03 EXA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.