MOT Status
ExpiredMileage
90,794 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill to floor (7.1.1 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Headlamp reflector slightly defective (4.1.1 (b) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill to floor (7.1.1 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Track rod end ball joint has slight play both sides (2.1.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Vehicle structure is corroded but structural rigidity is not significantly reduced various points front and rear (6.1.1 (c) (i))
Front Track rod end ball joint has slight play both sides (2.1.3 (b) (i))
Front Windscreen wiper not working both sides (3.4 (a))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Vehicle structure is corroded but structural rigidity is not significantly reduced various points front and rear (6.1.1 (c) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Front Tyre worn close to the legal limit outer edge (4.1.E.1)
Offside Rear tyre wall showing signs of ageing
Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Nearside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Oil leak
Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Vehicle structure has slight corrosion (6.1.B.2)
centre exhaust corroded and front mounting attatchment
offside rear tyre worn on inner edge
Nearside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Headlamp aim too low (1.8)
Offside Rear Vehicle structure has slight corrosion (6.1.B.2)
centre exhaust corroded and front mounting attatchment
offside rear tyre worn on inner edge
Horn not working (1.6.2a)
Coolant leak
Oil leak
both side sills corroding
Nearside Ball joint has excessive play (2.2.B.1f)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Front Sub-frame attachment bracket/mounting bolt missing (2.4.G.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Brake pipe excessively corroded (3.6.B.2c)
Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Headlamp aim too low (1.8)
lambda sensor wire support bracket not attached
both rear tyres starting to deteriorate
offside front lower suspension arm rubber bush starting to de-bond
Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
both rear tyres starting to deteriorate
offside front lower suspension arm rubber bush starting to de-bond
nearside front steering arm where it connects to steering rack slight play in ball joint
offside front and nearside front lower suspension arms rubber bushes starting to de-bond
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front brake disc excessively scored (3.5.1h)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
nearside front steering arm where it connects to steering rack slight play in ball joint
offside front and nearside front lower suspension arms rubber bushes starting to de-bond
offside rear shock absorber - tiny seepage
Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear coil spring fractured (2.4.C.1a)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Rear coil spring fractured (2.4.C.1a)
nearside front lower suspension arm rubber bush starting to de-bond
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EJ03 SNY is a 2003 Ford Ka in Red with a 1,299cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 66.7%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying EJ03 SNY, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of EJ03 SNY?
You can check the full history of EJ03 SNY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EJ03 SNY registered?
EJ03 SNY is a 2003 Ford Ka, first registered on 30 April 2003.
Is EJ03 SNY safe to buy?
The MOT history for EJ03 SNY shows 21 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EJ03 SNY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EJ03 SNY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.