2003 Toyota Yaris

Exhaust has a minor leak of exhaust gases front and rear (6.1.2 (a))

Headlamp lens slightly defective both are faded (4.1.1 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust has a minor leak of exhaust gases front and rear (6.1.2 (a))

Headlamp lens slightly defective both are faded (4.1.1 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Parking brake leaver has slight travel...

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear axle slightly corroded..

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Vehicles internal headlight adjuster altered to recheck lights ()

Nearside Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Offside Rear Service brake grabbing severely (1.2.1 (c))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Vehicles internal headlight adjuster altered to recheck lights ()

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside & offside sill area (5.3.6 (a) (i))

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Headlamp lens slightly defective Nearside & offside (4.1.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Nearside & offside (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced Nearside & offside (6.1.1 (c) (i))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

exhaust bracket broken exhaust still secure

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

exhaust bracket broken exhaust still secure

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Slight bind (not detecable in rollers)

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Slight bind (not detecable in rollers)

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

both front anti roll bar link bushes starting to split.

both front head lamps starting to diss-colour.

front brake pads low.

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill section. (2.4.A.3)

Offside Rear Stop lamp not working (1.2.1b)

both front anti roll bar link bushes starting to split.

both front head lamps starting to diss-colour.

front brake pads low.

n/s/f head lamp slightly diss-coloured.

n/s/r and o/s/f tyre valves perished.

n/s/r wheel arch signs of corrosion.

very slight bind o/s/r brake.

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Registration plate lamp not working (1.1.C.1d)

slight corrosion n/s sill

n/s/r sill rusty

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

n/s/r sill rusty

Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

front brake pads wearing

front brake pads wearing