2006 Toyota Aygo

Exhaust has a minor leak of exhaust gases Back box (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Tyre worn close to legal limit/worn on edge Both (5.2.3 (e))

Front Upper Macpherson strut mounting damaged but not seriously weakened Both (5.3.3 (b) (i))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both side axle bush prescribed area (5.3.6 (a) (i))

Exhaust emissions likely to be affected by an exhaust leak Back box (8.2.1.1 (b))

Nearside Rear Brake pipe excessively corroded Front to Rear (1.1.11 (c))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Brake pipe excessively corroded Front to Rear (1.1.11 (c))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Tyre worn close to legal limit/worn on edge Both (5.2.3 (e))

Front Upper Macpherson strut mounting damaged but not seriously weakened Both (5.3.3 (b) (i))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both side axle bush prescribed area (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread /rear (0.1 (b))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. both (1.4.2 (a) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Rear axle/surrounding area covered with underseal

Rear suspension/braking component covered with excessive underseal protection unable to thorughly inspect testable items

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened and allied components (5.3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Brake pad(s) less than 1.5 mm thick both side (1.1.13 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Emissions not tested unable to fit Emissions probe into exhaust system (8.2.1.2 (d))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake pad(s) wearing thin (3.5.1g)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside front brake juddering slightly (3.7.A.2b)

Offside front brake juddering slightly (3.7.A.2b)

all for tyres cracking around treads , cords or ply not showing yet.Advise to replace soon. 155/65/14

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)