2010 Ford S-max

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords outer sidewall (5.2.3 (d) (i))

Nearside Front Tyre worn close to legal limit/worn on edge worn on edge (5.2.3 (e))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement front trailing arm bush (5.3.4 (a) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Tyre worn close to legal limit/worn on edge worn on edge (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement front trailing arm bush (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

front and rear suspension components corroded

Offside Front Position lamp not working (4.2.1 (a) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamps BOTH (4.7.2 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin inner pads (1.1.13 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Engine oil level critically low

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin inner pads (1.1.13 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing inner tyre tread section perishing (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge outer edge wearing smooth (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge outer edge wearing low (5.2.3 (e))

Offside Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge outer edge wearing smooth (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge outer edge wearing low (5.2.3 (e))

Offside Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Outer Drive shaft flexible coupling excessively deteriorated (6.1.7 (d) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pad(s) wearing thin both rear (1.1.13 (a) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm Worn on the inside edge (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm Worn on the outside edge (5.2.3 (e)) DANGEROUS

OSF tyre wearing on outside edge

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)