2014 Yamaha Yzf

Nearside Front Brake hose has slight corrosion to ferrules (1.1.12 (f) (i))

Offside Rear Exhaust noisy (8.1.1 (a))

Offside Rear Lower Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Rear Suspension arm pin or bush excessively worn Swinging arm bearings. (5.3.4 (a) (i))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake hose has slight corrosion to ferrules (1.1.12 (f) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Number plate light dim.

Rear Brake lever bent, but can still be readily applied.

Offside Front Headlamp insecure dip beam bulb incorrectly fitted (4.1.1 (c))

Exhaust noisy (8.1.1 (a))

Shock absorber has a light misting of oil left hand fork leg (5.3.2 (b))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Headlamp aim unable to be tested (4.1.2 (b))

Front Headlamp light intensity severely reduced led bulbs (4.1.4 (a))

Nearside Front Handlebar retaining device loose (2.2.1 (b) (i))

Rear Footrest missing (6.2.12 (a))

Rear Rear reflector missing (4.8.2 (a) (ii))

Rear Shock absorber has an excessively worn bush all linkage bearings (5.3.2 (c))

Rear Suspension component pin or bush excessively worn swingarm bearings (5.3.4 (a) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake fluid below minimum mark leaking (1.1.10 (d) (i))

Nearside Front Lower Brake pad(s) close to minimum limit (1.1.13 (a))

Nearside Front Upper Clutch lever bent (6.2.7 (b))

Drive chain slightly loose (6.1.7 (c) (i))

Front Steering linkage locking device ineffective (2.1.3 (d))

Suspension component has an unsafe modification Clamp on L-plate fitted to inner fork leg (5.3.3 (c) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Front Brake lever is bent and the brake cannot be readily applied (1.1.2 (d))

Front Clutch lever shortened so it cannot be readily operated (6.2.7 (b))

Nearside Drive chain excessively loose (6.1.7 (c) (i))

Nearside Drive chain worn to excess (6.2.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))