2001 Toyota Yaris

Headlamp has a product on the lens but not seriously reducing light output border line (4.1.4 (b))

Offside Front Seat belt webbing slightly damaged or frayed border line (7.1.2 (b) (ii))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

Windscreen damaged but not adversely affecting driver's view stone chip on nearside (3.2 (a) (i))

reverse lights not working

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Tyre worn close to legal limit/worn on edge both fronts (5.2.3 (e))

chip in screen, and rear inner sills corroded.

Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Tyre worn close to legal limit/worn on edge both fronts (5.2.3 (e))

chip in screen, and rear inner sills corroded.

Front Brake pad(s) wearing thin (3.5.1g)

Front Headlamp deteriorated but light output not reduced o/s&n/s (1.7.5a)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

high level stop lamp not working

nearside and offside front tyre perishing

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

Offside Stop lamp not working (1.2.1b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

high level stop lamp not working

nearside and offside front tyre perishing

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

under seals and under body corrosion

Nearside Front Front position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Offside Front Front position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Headlamp aim too high (1.8)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Headlamp aim too high (1.8)

o/s/r wheel slightly binding.

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

o/s/r wheel slightly binding.

Offside Stop lamp not working (1.2.1b)

Horn not working (1.6.2a)

Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Headlamp aim too low (1.8)

Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Headlamp aim too low (1.8)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front All position lamps not working (1.1.A.3b)

Offside Front All position lamps not working (1.1.A.3b)

Rear Registration plate lamp not working (1.1.C.1d)

Offside Stop lamp not working (1.2.1b)

Registration plate lamp not working (1.1.5c)