2003 Lexus IS200

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Outer Sub-frame corroded but not seriously weakened sill (5.3.3 (b) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Sub-frame is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Brake disc worn, pitted or scored, but not seriously weakened all discs (1.1.14 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced both outer sills (6.1.1 (c) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Front Position lamp not working both sides (4.2.1 (a) (ii))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Brake disc worn, pitted or scored, but not seriously weakened all discs (1.1.14 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced both outer sills (6.1.1 (c) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Both front tyres worn to edges

N/s/f shock damp

O/s/f and n/s/f lower wishbone inner rear bushes perishing

O/s/r and n/s/r outer sills corroding

Both front tyres worn to edges

N/s/f shock damp

Nearside Front Position lamp not working (4.2.1 (a) (ii))

O/s/f and n/s/f lower wishbone inner rear bushes perishing

O/s/r and n/s/r outer sills corroding

Offside Front Position lamp not working (4.2.1 (a) (ii))

Front Upper Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Registration plate does not conform to the specified requirements rear (0.1 (d))

Headlamp light source and lamp not compatible both (4.1.4 (c))

Offside Front Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Upper Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Shock absorber has a light misting of oil (2.7.3)

rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Registration plate lamp not working (1.1.C.1d)

rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Front tyres slight worn both

Front wipers slight worn

Rear Brake pad(s) wearing thin both (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)