2008 Honda FJS600

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b))

Front Shock absorber has a reduced damping effect both (5.3.2 (b))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front shock absorbers have slight reduction in damping

Offside Rear Brake disc worn, but not excessively Getting close to minimum wear limit (1.1.14 (a) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

water proofing riding covers fitted hindering inspection

Nearside Rear Position lamp not working (4.2.1 (a))

Offside Rear Exhaust has a major leak of exhaust gases Silencer to front pipe blowing badly (6.1.2 (a))

Front brake pad material coming away from backplates

Rear rear tyre flat and badly mis shapened

Rear tyre valve perished to excess causing tyre to be totally flat

Front brake pad material coming away from backplates

Rear rear tyre flat and badly mis shapened

Rear tyre valve perished to excess causing tyre to be totally flat

Front Brake caliper excessively corroded and likely to crack binding excessively difficult to turn wheel, (1.1.16 (d) (ii))

Rear Brake caliper excessively corroded and likely to crack Binding excessively cannot turn wheel (1.1.16 (d) (ii))

Steering headbearing has slight free play Slightly notchy headrace bearings (2.2.2)

Headlamp at least one does not illuminate on main beam Dip beam not working (1.2.2a(ii))

Rear position lamp does not illuminate immediately when it is switched on one rear light not working (1.1.3a)

Steering headbearing has slight free play Slightly notchy headrace bearings (2.2.2)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Roller brake test indicates a binding brake (3.3.A1a)