2003 Aprilia Mojito 125

Rear wheel bearings have slight free play (2.4.A.2c)

Dipswitch does not deflect the main beam/s, making them into dipped beam/s (1.2.2b(ii))

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Tyre has ply or cord exposed (4.1.2a(iii)

Front Front tyre side wall perishing slightly

Rear wheel bearings have slight free play (2.4.A.2c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp aim too high (1.6)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Front Front tyre side wall perishing slightly

Rear wheel bearings have slight free play (2.4.A.2c)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear wheel bearings have slight free play (2.4.A.2c)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear wheel bearings have slight free play (2.4.A.2c)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Steering movement excessively stiff with the wheel raised (2.2.1b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear wheel bearings have slight free play (2.4.A.2c)

Steering headbearing has slight free play (2.2.2)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Direction indicators flashing more than 120 times per minute (1.5.1c)

Horn not working (1.7.3a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Roller brake test indicates a severely grabbing brake (3.3.A1b)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear reflector on motorcycle missing (1.4.1)

1/seat mount broken 2/rear footrest stiff

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))