2003 Ford Ka

Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outsides (6.1.B.2)

Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides sill inner and outer (6.1.B.2)

All suspension parts and vehicle structure corroded

Front Brake pipe slightly corroded (3.6.B.2c)

Oil leak ()

Rear Foot brake just met the brakes limit

Vehicle structure has slight corrosion underneath (6.1.B.2)

Vehicle structure has slight corrosion underneath (6.1.B.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Stop lamp not working (1.2.1b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Lower Body has slight corrosion (6.1.B.2)

eng warning lamp on

Emissions not tested (7.0)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Lower Body has slight corrosion (6.1.B.2)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

eng warning lamp on

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front coil spring fractured (2.4.C.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Headlamp aim too low (1.8)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Headlamp aim too low (1.8)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Inner Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm synthetic bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear coil spring incomplete (2.4.C.1a)

Nearside Headlamp aim too low and too far to the right. (1.8)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Headlamp aim too low (1.8)

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)