2005 Audi A4

Nearside Front Side repeater slightly discoloured (4.4.3 (a))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Lower Suspension arm ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement lower arms rear bushes and front upper arms rear bushes both sides (5.3.4 (a) (i))

Front Tyre slightly damaged/cracking or perishing and rear all x 4 (5.2.3 (d) (ii))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Lower Suspension arm ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement lower arms rear bushes and front upper arms rear bushes both sides (5.3.4 (a) (i))

Front Tyre slightly damaged/cracking or perishing and rear all x 4 (5.2.3 (d) (ii))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

osf and nsf upper and lower arms rubber bushes and ball joint dust cover deteriorated

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

osf and nsf upper and lower arms rubber bushes and ball joint dust cover deteriorated

Offside Rear Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

osf and nsf lower rear arms rear bushes have slight play and both sides front lower arms ball joint dust covers are deteriorated

Nearside Front Headlamp aim too high (4.1.2 (a))

Offside Front Headlamp aim too high (4.1.2 (a))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

osf and nsf lower rear arms rear bushes have slight play and both sides front lower arms ball joint dust covers are deteriorated

Front Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))

Front Shock absorbers light misting of oil or has limited damping effect both sides (5.3.2 (b))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

oil leak

x 2 front suspension arm lower ball joint bust cover deterioated

Front Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))

Front Shock absorbers light misting of oil or has limited damping effect both sides (5.3.2 (b))

Offside Front Headlamp not working on dipped beam and bracket is broken (4.1.1 (a) (ii))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

oil leak

x 2 front suspension arm lower ball joint bust cover deterioated

Tyre worn close to the legal limit all four tyres tread low inner and outerspick (4.1.E.1)

Oil leak ()

Supplementary Restraint System warning lamp does not illuminate (5.4.2)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Headlamp aim too high (1.8)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Rear Registration plate lamp not working (1.1.C.1d)

Front registration plate faded (6.3.1d)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Headlamp aim too high (1.8)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)