MOT Status
ValidMileage
209,060 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Suspension arm pin or bush excessively worn rear (5.3.4 (a) (i))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Lower Suspension arm pin or bush excessively worn rear (5.3.4 (a) (i))
Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Suspension arm pin or bush worn but not resulting in excessive movement N/s off/s front (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Lower Gearbox mounting defective stabiliser ()
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive rear trailing arm area inner sill (5.3.6 (a) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive rear trailing arm area inner sill (5.3.6 (a) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Lower Gearbox mounting defective stabiliser ()
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive rear trailing arm area inner sill (5.3.6 (a) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive rear trailing arm area inner sill (5.3.6 (a) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))
Child Seat fitted not allowing full inspection of adult belt ()
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Child Seat fitted not allowing full inspection of adult belt ()
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()
Nearside Rear Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Exhaust mounting defective (6.1.2 (a))
Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()
Rear Exhaust mounting defective (6.1.2 (a))
Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Inner Tyre worn close to the legal limit edge (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear wheel bearing has slight play (2.6.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Focus C-max?
Based on 1,326,487 MOT tests across 79,932 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EK06 DVH is a 2006 Ford Focus C-max in Silver with a 1,999cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 78.3%.
Across all 2006 Ford Focus C-max models, the average MOT pass rate is 73.4% with a typical mileage of 70,386 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Focus C-max fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 67,238 recorded failures. If you're considering buying EK06 DVH, it's worth having these areas checked by a mechanic before committing.
The Ford Focus C-max typically stays on UK roads for around 23 years. At 20 years old, this Ford Focus C-max is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of EK06 DVH?
You can check the full history of EK06 DVH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EK06 DVH registered?
EK06 DVH is a 2006 Ford Focus C-max, first registered on 18 March 2006.
Is EK06 DVH safe to buy?
The MOT history for EK06 DVH shows 23 tests with a 78.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EK06 DVH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EK06 DVH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.