MOT Status
ValidMileage
50,712 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Subframe mounting prescribed area is corroded but not considered excessive rear of subframe (5.3.6 (a) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner wing areas (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Registration plate deteriorated but not likely to be misread cracked (0.1 (b))
Rear Valance and boot floor area damaged
Front Headlamp aim projected beam image is obviously incorrect nearside and offside (4.1.2 (c))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Rear Fuel pipe insecure (6.1.3 (a) (i))
Rear Tailgate cannot be secured in the closed position (6.2.1 (e))
Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Front Headlamp lens slightly defective (4.1.1 (b) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive rear of subframe (5.3.6 (a) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner wing areas (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Registration plate deteriorated but not likely to be misread cracked (0.1 (b))
Rear Valance and boot floor area damaged
Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced inner wing areas (6.1.1 (c) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive rear of subframe (5.3.6 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing just acceptable (5.2.3 (d) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing just acceptable (5.2.3 (d) (ii))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced inner wing areas (6.1.1 (c) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive rear of subframe (5.3.6 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing just acceptable (5.2.3 (d) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing just acceptable (5.2.3 (d) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Offside Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both rear tyre side walls cracking
Front Brakes imbalanced across an axle 34% (3.7.B.5b)
Front Inner Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both rear tyre side walls cracking
front brake discs corroded and worn
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
slight bind to n/s/f brake
Fuel system component insecure fuel filter (7.2.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
slight bind to n/s/f brake
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Headlamp aim too low (1.8)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Headlamp aim too high (1.8)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
wiper have not been tested
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EK08 TZA is a 2008 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 58.8%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying EK08 TZA, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of EK08 TZA?
You can check the full history of EK08 TZA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EK08 TZA registered?
EK08 TZA is a 2008 Ford Ka, first registered on 31 March 2008.
Is EK08 TZA safe to buy?
The MOT history for EK08 TZA shows 17 tests with a 58.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EK08 TZA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EK08 TZA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.