2012 Ford Mondeo

Nearside Rear Inner Tyre worn close to legal limit/worn on edge and offside rear inner (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Exhaust mounting defective (6.1.2 (a))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Coil spring corroded Both (5.3.1 (b) (i))

Rear Suspension arm corroded but not seriously weakened Both (5.3.3 (b) (i))

Rear Suspension rod pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Central Exhaust mounting defective (6.1.2 (a))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Coil spring corroded Both (5.3.1 (b) (i))

Rear Suspension arm corroded but not seriously weakened Both (5.3.3 (b) (i))

Rear Suspension rod pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside mirror casing damaged.

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Front Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Headlamp cleaning device for LED or HID headlamp inoperative (4.1.6 (a) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp cleaning device for LED or HID headlamp inoperative (4.1.6 (a) (ii))

Offside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)