2003 Ford Transit

Brake load sensing valve linkage defective and function impaired inoperative (1.1.17 (a))

Brake pedal anti-slip provision worn smooth (1.1.2 (c))

Brake pipe excessively corroded front to rear (by fuel tank) (1.1.11 (c))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back cross member (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner arch / floor (5.3.6 (a) (i))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake lagging in operation (1.2.1 (d))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back cross member (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired inner arch / seal (5.3.6 (a) (i))

Oil leaking excessively from engine (8.4.1 (a) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Rear Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS

Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Rear bumper loose but not likely to fall off

Offside Front Tyre worn close to legal limit/worn on edge worn inner edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge worn inner edge (5.2.3 (e))

unable to check offside rear wheel bearing due to binding brake

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (inner wheel arch) (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (inner wheel arch) (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (inner sill) (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (outer sill) (2.4.A.3)

Rear Exhaust system not adequately supported (7.1.1)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded crossmember (2.4.A.3)

Registration plate lamp not working (1.1.C.1d)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Stop lamp not working (1.2.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch to floor pan (2.4.A.3)

Offside Stop lamp not working (1.2.1b)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nail in nearside rear tyre

Offside Rear Stop lamp not working (1.2.1b)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Nail in nearside rear tyre

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Headlamp aim too low (1.8)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Headlamp aim too low (1.8)

Registration plate lamp not working (1.1.C.1d)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

auxhillary drive belt split

Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front All position lamps not working (1.1.A.3b)

Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Axle beam has slight vertical movement between stub axle and axle beam (2.5.A.1a)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Exhaust emits excessive smoke or vapour of any colour (7.4.B.4)

Nearside Rear fog lamp not working (1.3.2b)

Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Parking brake: efficiency below requirements (3.7.B.7)

rear brake application uneven (3.7.B.2)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)