2006 Honda Accord

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill; (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill; (5.3.6 (a) (i))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Central Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear rear brake back plate corroded

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Front Service brake lagging in operation (1.2.1 (d))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front sill holed

Offside Front sill holed

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Power steering fluid level below minimum (2.1.5 (b) (i))

Power steering pipe/hose has slight seepage (2.1.5 (a))

exhaust heat shield insecure

various underbody corrosion

Front Position lamp light intensity obviously reduced both sides (4.2.3 (a) (i))

under body has surface corrosion

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Windscreen washer not working (3.5 (a))

Front Position lamp light intensity obviously reduced both sides (4.2.3 (a) (i))

under body has surface corrosion

Offside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

repairs covered in underseal

Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))

Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting bumper mounting (6.2.2 (d) (i))

Offside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

offside headlamp dim

Emissions not tested unable to pick up a reading due to exhaust blow (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

heatshields loose

offside headlamp dim

Offside Rear brake pads slightly wearing

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Front Inner Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear brake pads slightly wearing

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

nearside front tyre inner edge smooth rqrs replacement as soon as possible.

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

nearside front tyre inner edge smooth rqrs replacement as soon as possible.

N/s/f Shock leak

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)