2010 Mini Cooper

Both rear shock absorbers HEAVILY CORRODED

Covers fitted not allowing full inspection

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush heavily worn (5.3.4 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Electrical wiring inadequately secured brake sensor wire (4.11 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement rear bush heavily worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive heavy oil leaks (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened HEAVILY CORRODED (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive HEAVILY CORRODED (5.3.6 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Both rear shock absorbers HEAVILY CORRODED

Covers fitted not allowing full inspection

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush heavily worn (5.3.4 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Electrical wiring inadequately secured brake sensor wire (4.11 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement rear bush heavily worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive heavy oil leaks (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened HEAVILY CORRODED (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive HEAVILY CORRODED (5.3.6 (a) (i))

TPMS light on

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Front Coil spring corroded both (5.3.1 (b) (i))

Front Inner slight free play inner steering arms nsf and osf

Front Lower Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security nsr and osr chassis corroded (6.2.2 (d) (i))

Rear Inner Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security nsr and osr inner sills corroded (6.2.2 (d) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear nsr and osr shock absorbers corroded

engine, sill and under guards fitted, ns and os restricting full inspection

Central Front Exhaust silencer insecure (8.1.1 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Exhaust has a major leak of exhaust gases hole in front and central sleeve (6.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Lower Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both rear bushes on both front lower arms (5.3.4 (a) (i))

Front Shock absorbers has slight external damage to the casing both corroded (5.3.2 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre obviously under inflated (5.2.3 (l))

Offside Rear brake pad sensor wire detatched

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Shock absorbers has slight external damage to the casing both rear HEAVILY CORRODED (5.3.2 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

tpms lamp on indicating low pressure

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Near & Offside, Recommend Replacement (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Near & Offside, Recommend Replacement (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Central Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Road wheel fixing missing wheel bolt missing (5.2.1 (a) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust has a minor leak of exhaust gases flexi (6.1.2 (a))

Offside Front wiper smeary

Front Tyre worn close to the legal limit both sides (4.1.E.1)

both rear tyres cracked on sidewall