2010 Yamaha Yzf

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

All direction indicators not working (4.4.1 (a) (ii))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Nearside Front Non obligatory mirror damaged ()

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Cush Drive Rubbers Worn

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Drive chain excessively tight (6.1.7 (k) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Front Stop lamp not working (4.3.1 (a) (ii))

Rear Brake excessively binding (1.2.1 (f))

Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Front Suspension Has Slightly reduced damping effect

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Central Front Lower Suspension arm ball joint excessively worn bush/bearing has excessive wear -rear suspension linkage where it mounts to frame (5.3.4 (a) (i))

Drive chain horseshoe locking device incorrectly fitted wrong way round (6.1.7 (j) (i))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Brake excessively binding (1.2.1 (f))

Front Stop lamp not working (4.3.1 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate incorrect too small (0.1 (c))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Front reduced damping effect

Nearside Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Drive chain slightly loose (6.2.1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))