1999 Subaru Impreza

Nearside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Outer sill damaged

Oil leak, but not excessive (8.4.1 (a) (i))

underbody and various suspension components corroded

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Rear Brake pipe clips or supports missing, pipe adequately supported (1.1.11 (d) (i))

Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

o/s/r sill flange damaged

previous welding repairs carried out

some corrosion to underside

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Offside Headlamp aim projected beam image is obviously incorrect high/no pattern (4.1.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Rear Brake pipe clips or supports missing, pipe adequately supported (1.1.11 (d) (i))

Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

o/s/r sill flange damaged

previous welding repairs carried out

some corrosion to underside

Nearside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened trailing arm (5.3.3 (b) (i))

Offside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened trailing arm (5.3.3 (b) (i))

Rear Sub-frame pin or bush excessively worn prop shaft/diff mountings, both sides (5.3.4 (a) (i))

Nearside Rear Inner Suspension rod attachment bracket/mounting insecure and impairing directional stability (5.3.3 (a) (ii)) DANGEROUS

corrosion to all suspension components

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

corrosion to front and rear suspension components

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Rear Brake hose ferrule excessively corroded and likely to fail both sides (1.1.12 (f) (ii)) DANGEROUS

Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired subframe (6.2.2 (d) (ii)) DANGEROUS

Rear Sub-frame pin or bush likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Rear Upper Macpherson strut mounting likely to fail both sides (5.3.3 (b) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

corrosion to whole of underside

corrosion to underside floor,sills,and suspension components

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) DANGEROUS

Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) DANGEROUS

corrosion to underside floor,sills,and suspension components

Nearside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii)) DANGEROUS

Offside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii)) DANGEROUS

Offside Rear Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Offside Rear Flexible hose insecure

Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.C.1b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Registration plate lamp shows direct white light to the rear (1.1.C.1f)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.C.1b)

Rear Parking brake recording little or no effort (3.7.D.3a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

rear discs heavily worn

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Offside Inner Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)