MOT Status
ExpiredMileage
81,577 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Brakes imbalanced across an axle (1.2.1 (b) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Upper Anti-roll bar linkage has excessive play in a pin/bush drop link bent (2.4.G.2)
Offside Front Anti-roll bar linkage has excessive play in a pin/bush drop link (2.4.G.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Rear fog lamp not working (1.3.2b)
Speedometer cannot be illuminated. (6.7.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nail in offside front tyre
Nail in offside front tyre
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is distorted but not considered excessive (2.4.A.3)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
n/s/f strut top bearing noisey
rear brake increase and decrease a bit high
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is distorted but not considered excessive (2.4.A.3)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear fog lamp not working (1.3.2b)
n/s/f strut top bearing noisey
rear brake increase and decrease a bit high
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Front Exhaust has part of the system excessively deteriorated (7.1.1a)
Offside Front brake caliper securing device missing (3.5.1j)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear fog lamp not working (1.3.2b)
Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Offside Stop lamp not working (1.2.1b)
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Brake pedal anti-slip provision missing (3.3.A.1b)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Registration plate lamp not working (1.1.5c)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear fog lamp not working (1.3.2b)
Front subframe forward mounting areas corroding
Front tyres wearing badly on inner edges
Nearside Front Road wheel slightly damaged (4.2.A.1a)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front wipers are smeary (strong advise)
lower arm bushes are perishing
one centre brake light not working
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EN03 ZSD is a 2003 Ford Ka in Blue with a 1,599cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 57.9%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying EN03 ZSD, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of EN03 ZSD?
You can check the full history of EN03 ZSD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EN03 ZSD registered?
EN03 ZSD is a 2003 Ford Ka, first registered on 30 June 2003.
Is EN03 ZSD safe to buy?
The MOT history for EN03 ZSD shows 19 tests with a 57.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EN03 ZSD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EN03 ZSD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.