MOT Status
ValidMileage
183,560 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
both rear wheel arches corroding
corrosion forming both inner sills
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
both rear wheel arches corroding
corrosion forming both inner sills
Nearside Rear Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Power steering component has slight seepage from a component (2.1.5 (a))
corrosion forming both inner sills/rear wheel arches
Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Power steering component has slight seepage from a component (2.1.5 (a))
corrosion forming both inner sills/rear wheel arches
both front tyres wearing outer edge
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
both front tyres wearing outer edge
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Fuel filler neck corroded
Headlights Cloudy
Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
fuel filler pipe is corroded
Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Front Power steering pipe/hose slightly corroded Cooler pipe. (2.1.5 (g) (i))
Offside Front Position lamp not working (4.2.1 (a))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Upper Power steering pipe/hose leaking (2.1.5 (a))
Nearside Rear Brake pad(s) incorrectly mounted (1.1.13 (c)) DANGEROUS
Offside Rear Brake pad(s) incorrectly mounted (1.1.13 (c)) DANGEROUS
Front Power steering pipe/hose slightly corroded Cooler pipe. (2.1.5 (g) (i))
Nearside Rear Inner Position lamp is not working.
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake is showing signs of overheating.
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Position lamp not working (4.2.1 (a))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake is showing signs of overheating.
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
engine cover fitted
fuel filler pipes slightly corroded
not able to check outer sills
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
engine cover fitted
fuel filler pipes slightly corroded
not able to check outer sills
Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
How Reliable is the Honda Accord?
Based on 2,311,969 MOT tests across 198,303 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EN06 UCM is a 2006 Honda Accord in Grey with a 2,204cc diesel engine. This vehicle has been through 25 MOT tests with a personal pass rate of 72%.
Across all 2006 Honda Accord models, the average MOT pass rate is 74.3% with a typical mileage of 98,038 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Honda Accord fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 104,224 recorded failures. If you're considering buying EN06 UCM, it's worth having these areas checked by a mechanic before committing.
The Honda Accord typically stays on UK roads for around 33 years. At 20 years old, this Honda Accord is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of EN06 UCM?
You can check the full history of EN06 UCM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EN06 UCM registered?
EN06 UCM is a 2006 Honda Accord, first registered on 30 June 2006.
Is EN06 UCM safe to buy?
The MOT history for EN06 UCM shows 25 tests with a 72% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EN06 UCM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EN06 UCM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.