MOT Status
ExpiredMileage
66,864 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Items removed from driver's view prior to test ()
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
advise offside front floor pan and outer sill (centre) corroded
Offside Rear Position lamp not working (4.2.1 (a))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Items removed from driver's view prior to test ()
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
advise offside front floor pan and outer sill (centre) corroded
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
slight corrosion offside rear inner and outer sills
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
slight oil leak
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
nearside front tyre wearing outer edge
oil leak from reverse light switch
Nearside Front Headlamp aim too high (1.8)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Headlamp aim too high (1.8)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
nearside front tyre wearing outer edge
oil leak from reverse light switch
Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EN08 BZJ is a 2008 Ford Ka in Black with a 1,297cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 78.6%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying EN08 BZJ, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of EN08 BZJ?
You can check the full history of EN08 BZJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EN08 BZJ registered?
EN08 BZJ is a 2008 Ford Ka, first registered on 30 June 2008.
Is EN08 BZJ safe to buy?
The MOT history for EN08 BZJ shows 14 tests with a 78.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EN08 BZJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EN08 BZJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.