MOT Status
ValidMileage
182,846 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated perished. (5.3.4 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Outer light lens has a small hole in it.
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Exhaust mounting defective Rear exhaust support rubbers are perished. (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Nearside Front Outer Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Front Items removed from driver's view prior to test Items hanging from rear view mirror. ()
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Inner Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated perished. (5.3.4 (b) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Outer Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Outer light lens has a small hole in it.
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Exhaust mounting defective Rear exhaust support rubbers are perished. (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))
Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))
Front Registration plate does not conform to the specified requirements (0.1 (d))
Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))
Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))
Nearside Front Service brake excessively binding (1.2.1 (f))
Offside Front Seat belt retracting mechanism defective (7.1.2 (e))
Registration plate lamp does not illuminate simultaneously with the position lamps x 2 (4.7.2 (a))
Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Rear Coil spring corroded both (5.3.1 (b) (i))
Rear heat shields insecure
Exhaust mounting defective Rear rubbers are perished (6.1.2 (a))
Offside Front DTR light less than 50%
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear heat shield is loose but not likely to become detached
Exhaust mounting defective Rear rubbers are perished (6.1.2 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front DTR light less than 50%
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear heat shield is loose but not likely to become detached
Windscreen washer provides insufficient washer liquid (3.5 (a))
Central Rear Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Central Rear Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Outer Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Outer Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Central Rear Child Seat fitted not allowing full inspection of adult belt ()
Nearside Front Headlamp aim too high (4.1.2 (a))
Offside Front Headlamp aim too high (4.1.2 (a))
Nearside Front Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Central Rear Child Seat fitted not allowing full inspection of adult belt ()
Rear Exhaust mounting defective rubber mounting perished (6.1.2 (a))
Oil leak, but not excessive (8.4.1 (a) (i))
Headlamp cleaning device for LED or HID headlamp inoperative (4.1.6 (a) (ii))
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Rear Suspension arm pin or bush excessively worn Trailing arm bush (5.3.4 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Child Seat fitted not allowing full inspection of adult belt ()
Front Brake pad(s) wearing thin (3.5.1g)
Passenger seat(s) missing at time of test rear folding seats/belts ()
Rear Brake pad(s) wearing thin (3.5.1g)
Engine covers fitted obscuring some components in the engine bay
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Under-trays fitted obscuring some underside components
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Engine covers fitted obscuring some components in the engine bay
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Under-trays fitted obscuring some underside components
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Ford S-max?
Based on 1,368,227 MOT tests across 101,843 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EN10 BVM is a 2010 Ford S-max in Silver with a 1,997cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 61.9%.
Across all 2010 Ford S-max models, the average MOT pass rate is 74.2% with a typical mileage of 83,408 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford S-max fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 26,089 recorded failures. If you're considering buying EN10 BVM, it's worth having these areas checked by a mechanic before committing.
The Ford S-max typically stays on UK roads for around 20 years. At 16 years old, this Ford S-max is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of EN10 BVM?
You can check the full history of EN10 BVM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EN10 BVM registered?
EN10 BVM is a 2010 Ford S-max, first registered on 1 July 2010.
Is EN10 BVM safe to buy?
The MOT history for EN10 BVM shows 21 tests with a 61.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EN10 BVM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EN10 BVM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.