MOT Status
ValidMileage
127,664 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear Suspension rod corroded but not seriously weakened o/s and n/s (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Rear Suspension rod corroded but not seriously weakened o/s and n/s (5.3.3 (b) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Hydraulic leak, but not excessive (8.4.1 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Driver's view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii))
Hydraulic leak, but not excessive (8.4.1 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Coil spring corroded all (5.3.1 (b) (i))
Front Drive shaft joint constant velocity boot severely deteriorated both (6.1.7 (g) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Rear Child Seat fitted not allowing full inspection of adult belt o-s & central ()
engine trays fitted
Front Brake disc worn, but not excessively both sides (1.1.14 (a) (i))
Front Brake pad(s) wearing thin both (1.1.13 (a) (ii))
Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Offside Rear tyre wall cracking
age cracks o/s/r tyre
Child seat fitted not allowing full inspection of adult belt
front brake pads wearing thin
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Child seat fitted not allowing full inspection of adult belt
Front Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Ford S-max?
Based on 1,368,227 MOT tests across 101,843 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EN10 JCU is a 2010 Ford S-max in Blue with a 2,261cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 77.8%.
Across all 2010 Ford S-max models, the average MOT pass rate is 74.2% with a typical mileage of 83,408 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford S-max fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 26,089 recorded failures. If you're considering buying EN10 JCU, it's worth having these areas checked by a mechanic before committing.
The Ford S-max typically stays on UK roads for around 20 years. At 16 years old, this Ford S-max is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of EN10 JCU?
You can check the full history of EN10 JCU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EN10 JCU registered?
EN10 JCU is a 2010 Ford S-max, first registered on 1 July 2010.
Is EN10 JCU safe to buy?
The MOT history for EN10 JCU shows 18 tests with a 77.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EN10 JCU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EN10 JCU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.