2013 Sym Az

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Steering operation impeded by a fairing (2.1.4 (e))

Offside Front Shock absorber has a light misting of oil fork seal leaking slightly (5.3.2 (b))

Registration plate deteriorated but not likely to be misread number plate cracked through on both outer lower corners but is secure & can be read (0.1 (b))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake lever is short but brake can still be readily applied (1.1.2 (d))

Registration plate does not conform to the specified requirements (0.1 (d))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake lever is short but brake can still be readily applied (1.1.2 (d))