MOT Status
ExpiredMileage
130,208 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake load sensing valve defective and function impaired (3.6.E.3)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Radius arm has excessive play in a pin/bush (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Lower Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Brake load sensing valve seized (3.6.E.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Stop lamp not working (1.2.1b)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside rear brake recording little or no effort (3.7.B.5a)
Brake load sensing valve inoperative (3.6.E.3)
Brake load sensing valve linkage seized (3.6.E.3)
Brake pedal has insufficient reserve movement (3.3.A.5)
Brake pedal spongy (3.3.B.1b)
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust system not adequately supported (7.1.1)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Nearside Side repeater incorrect colour (1.4.A.2f)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Side repeater incorrect colour (1.4.A.2f)
front brake application uneven (3.7.B.2)
rear brake application uneven (3.7.B.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
front pads look worn
fuel tank straps rusty
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Stop lamp not working (1.2.1b)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
front pads look worn
fuel tank straps rusty
eml warning light on
slight brake bind to n/s/r
slight exhaust blow
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
both front tyres close too limit and wearing on edges
o/s/r tyre side wall perrished
both front lower arm rear bushes starting to pearsh
offside rear tyre starting to pearsh
slight play in steering rack
underside tested in wet conditions
Brake load sensing valve linkage seized (3.6.E.3)
Emissions not tested (7.0)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Headlamp aim too low (1.8)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim too low (1.8)
Offside Registration plate lamp not working (1.1.C.1d)
both front lower arm rear bushes starting to pearsh
offside rear tyre starting to pearsh
slight play in steering rack
underside tested in wet conditions
ems light on
Brake load sensing valve linkage seized (3.6.E.3)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Trailing arm has excessive play in a pin/bearing (2.4.G.2)
Registration plate lamp not working (1.1.5c)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
ems light on
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake lever has no reserve travel (3.1.6b)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EN51 MFO is a 2001 Peugeot 206 in Silver with a 1,360cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 50%.
Across all 2001 Peugeot 206 models, the average MOT pass rate is 66.3% with a typical mileage of 67,765 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying EN51 MFO, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 25 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of EN51 MFO?
You can check the full history of EN51 MFO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EN51 MFO registered?
EN51 MFO is a 2001 Peugeot 206, first registered on 21 December 2001.
Is EN51 MFO safe to buy?
The MOT history for EN51 MFO shows 20 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EN51 MFO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EN51 MFO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.