2003 Mazda MX-5

Exhaust has a minor leak of exhaust gases mid to rear join (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

n/s/f tyre split / repairs poor

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg (2.4.A.3)

Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Offside Registration plate lamp not fitted (1.1.C.1b)

Nearside Front tyre has a small cut on outer sidewall

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Oil leak ()

Steering and suspension components corroded

Nearside Rear coil spring broken (2.4.C.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Steering and suspension components corroded

Front Body has slight corrosion (6.1.B.2)

Nearside Rear coil spring corroded (2.4.C.1b)

Rear Body has slight corrosion (6.1.B.2)

steering pipe corroded

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Headlamp not working on main beam (1.7.5a)

Front Body has slight corrosion (6.1.B.2)

Nearside Rear coil spring corroded (2.4.C.1b)

Rear Body has slight corrosion (6.1.B.2)

steering pipe corroded

Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Front Suspension arm corroded but not seriously weakened (2.4.G.1)

surface corrosion nearside outer sill at rear

Offside Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Front Suspension arm corroded but not seriously weakened (2.4.G.1)

surface corrosion nearside outer sill at rear

Engine management light on

both outer sills corroding at rear.

rear brake pads worn thin.

rear exhaust joint corroded.

some fluctuations in brake test readings from the nearside front and offside rear wheels.

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Engine management light on

both outer sills corroding at rear.

rear brake pads worn thin.

rear exhaust joint corroded.

some fluctuations in brake test readings from the nearside front and offside rear wheels.

both front tyres wearing on edges.

both outer sills corroding at rear.

Nearside Obligatory mirror not clearly visible from the drivers seat or incapable of being adjusted to be clearly visible from the driver's seat (8.1.1d)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

near side rear tyre worn to 2.5mm and large piece missing from sidewall

Rear Brake pad(s) wearing thin (3.5.1g)

front brake disc inner faces badly pitted in poor condition

rear discs pitted

Windscreen wiper does not clear the windscreen effectively (8.2.2)

rear brake pads worn to 2mm approx'

rear brake pads worn to 2mm approx'

Front brake disc slightly pitted (3.5.1h)

Rear brake disc slightly pitted (3.5.1h)