2010 Mazda 5

Nearside Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Hydraulic brake calliper inadequately mounted retaining clip missing (1.1.16 (c) (i))

Offside Rear Suspension arm pin or bush excessively worn trailing arm front bush (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

exhaust heat shield loose

reduced light output from offside and nearside headlamp dipped beams

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

exhaust heat shield poorly secured

nearside inner drive shaft gaiter perished

offside rear trailing arm front bush in poor condition

reduced light output from offside and nearside headlamp dipped beams

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

reduced light output from offside headlamp dipped beam

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Headlamp light intensity severely reduced bulb incorrectly fitted (4.1.4 (a))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Position lamp not working (4.2.1 (a))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Slight exhaust blow rear box...

Rear Child Seat fitted not allowing full inspection of adult belt ()

Slight blow from back box of the exhaust

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Child Seat fitted not allowing full inspection of adult belt ()

Slight blow from back box of the exhaust

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

unable to inspect rear seats

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear tyre inner sidewall starting to split

unable to inspect rear seats

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)