2012 Yamaha Wr 125 X

Exhaust noisy (8.1.1 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Headlamp aim too high (4.1.2 (a))

Registration plate does not conform to the specified requirements too small (0.1 (d))

Steering operation restricted in free movement from lock to lock front mudguard hitting bodywork plus cables not routed correctly (2.1.4 (c))

Front Engine mounting/bracket missing (6.1.8 (a) (ii)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Nearside Front panel slightly loose

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Rear Footrest missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Rear Brake excessively binding (1.2.1 (f))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Central Rear Suspension rod pin, bush or joint worn but not resulting in excessive movement slight movement in swing arm lower bush (5.3.4 (a) (i))

Nearside Rear Drive chain slightly loose (6.1.7 (c) (i))

Central Front Headlamp aim too high lamp holder loose in headlamp (4.1.2 (a))

Central Rear Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Central Rear Suspension rod pin, bush or joint worn but not resulting in excessive movement slight movement in swing arm lower bush (5.3.4 (a) (i))

Nearside Rear Drive chain slightly loose (6.1.7 (c) (i))

Chain guard missing ()

Exhaust noisy (8.1.1 (a))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Front Stop lamp not working (4.3.1 (a) (ii))

Central Rear Suspension rod pin, bush or joint worn but not resulting in excessive movement slight movement in rear suspension bearing (5.3.4 (a) (i))

Nearside Rear no chain guard fitted

Central Rear Registration plate does not conform to the specified requirements (0.1 (d))

Central Rear Suspension rod pin, bush or joint worn but not resulting in excessive movement slight movement in rear suspension bearing (5.3.4 (a) (i))

Nearside Rear no chain guard fitted

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Headlamp missing (4.1.1 (a) (ii))

Nearside Front Motorcycle structure is deformed and structural rigidity is significantly reduced fairing missing leaving dangerous sharp edge (6.1.1 (a) (i))

Registration plate missing (0.1 (a))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Riders seat insecure (6.2.5 (a) (ii)) DANGEROUS

Exhaust mounting deteriorated. back mounting loose (7.1.1.c)

Exhaust noisy (7.1.2)

Nearside Rear Motorcycle structure slightly damaged mounting broken leaving fairing loose (6.1.1a)

Drive chain slightly loose (6.2.1d)

Chain guard missing

Drive chain worn but not considered excessive (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))