MOT Status
ValidMileage
120,958 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Boot does not open
Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Inner Headlamp damaged but light output not reduced (1.7.5a)
Suspension joint nearside lower dust cover split/missing
Suspension joint offside lower dust cover split/missing
Nearside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Suspension joint nearside lower dust cover split/missing
Suspension joint offside lower dust cover split/missing
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Centre Windscreen wiper blade deteriorated (8.2.2)
Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)
How Reliable is the Daimler Super V8?
Based on 11,576 MOT tests across 746 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EO02 CNC is a 2002 Daimler Super V8 in Black with a 3,996cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 77.3%.
Across all 2002 Daimler Super V8 models, the average MOT pass rate is 78.1% with a typical mileage of 75,996 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Daimler Super V8 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 342 recorded failures. If you're considering buying EO02 CNC, it's worth having these areas checked by a mechanic before committing.
The Daimler Super V8 typically stays on UK roads for around 31 years. At 24 years old, this Daimler Super V8 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of EO02 CNC?
You can check the full history of EO02 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EO02 CNC registered?
EO02 CNC is a 2002 Daimler Super V8, first registered on 12 April 2002.
Is EO02 CNC safe to buy?
The MOT history for EO02 CNC shows 22 tests with a 77.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EO02 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EO02 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.