2003 Ford Fusion

Central Front Gearbox mounting defective ()

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Headlamp levelling device inoperative (4.1.5 (a))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Headlamp lenses deteriorating

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre worn on inner and outer edges

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Brake pipe slightly corroded to flexi (3.6.B.2c)

Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Front brake disc modified but not seriously weakened nearside and offside (3.5.1n)

Nearside Front Brake pipe slightly corroded to flexi (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Front Headlamp has a product on the lens but not seriously reducing light output both sides (1.7.5a)

Front Tyre worn close to the legal limit both sides (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened both sides on inside edge (3.5.1i)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded both sides (3.6.B.2c)

Nearside Brake pipe excessively corroded front to rear (3.6.B.2c)

Offside Brake pipe excessively corroded front to rear (3.6.B.2c)

Front Headlamp has a product on the lens but not seriously reducing light output both sides (1.7.5a)

Front Tyre worn close to the legal limit both sides (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened both sides on inside edge (3.5.1i)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded both sides (3.6.B.2c)

injector seal leaking

near side rear tyre border line high/low spots

steel brake pipes rusty

Offside Front Brake pipe excessively corroded (3.6.B.2c)

injector seal leaking

near side rear tyre border line high/low spots

steel brake pipes rusty

front steel brake pipes rusty

injector seal blowing

Offside Front Brake pipe slightly corroded (3.6.B.2c)

advise rear exhaust box showing signs of corrosion

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

advise rear exhaust box showing signs of corrosion