2006 Chevrolet Matiz

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust emissions - engine idle speed too high (8.2.1.2 (e))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Oil leaking excessively from engine (8.4.1 (a) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

all tyres are age cracking

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Offside Registration plate lamp not working (1.1.C.1d)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear wheel bearing has excessive play (2.6.2)

Offside Suspension arm has excessive play in a ball joint (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Front Exhaust system not adequately supported (7.1.1)

Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Rear Rear wheel bearing has excessive play (2.6.2)

Nearside Rear Road wheel bead rim badly distorted (4.2.A.1a)

Offside Front Road wheel bead rim badly distorted (4.2.A.1a)

Offside Rear Road wheel bead rim badly distorted (4.2.A.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Front Brake pad(s) wearing thin (3.5.1g)

Front exhaust mounting is broken as this is next to flexi joint failure is likely

Headlamp aim too low (1.8)

Oil leak

Sump pan badly corroded

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

offside inner c.v joint has substantial play

Front exhaust mounting is broken as this is next to flexi joint failure is likely

Oil leak

Sump pan badly corroded

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

offside inner c.v joint has substantial play

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp aim too low (1.8)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Horn not working (1.6.2a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

rear wiper torn

Offside Headlamp not working on dipped beam (1.7.5a)

rear wiper torn