MOT Status
ValidMileage
151,934 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill section holed and corroded. (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch holed and corroded. (5.3.6 (a) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill section holed and corroded. (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch holed and corroded. (5.3.6 (a) (i))
Central Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner sill closure panel. (6.1.1 (c) (i))
Nearside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill closure panel. (6.1.1 (c) (i))
Central Front Lower Engine mounting damaged or deteriorated resulting in excessive movement Engine stabilizer mounting worn. (6.1.8 (a) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner sill closure panel. (6.1.1 (c) (i))
Nearside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill closure panel. (6.1.1 (c) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive INNER SILL (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive INNER SILL (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Parking brake motor/module bracket corroded but not seriously weakened
Nearside Rear Suspension arm pin or bush excessively worn TRAILING ARM BUSH (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush excessively worn TRAILING ARM BUSH (5.3.4 (a) (i))
Rear Exhaust system insecure (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive INNER SILL (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive INNER SILL (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
UNDERTRAYS FITTED
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Emissions not tested due to overheating (8.2.2.2 (e))
Nearside Front Inner Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Inner Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Gearbox mounting defective
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Offside Rear Child Seat fitted not allowing full inspection of adult belt
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Offside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Offside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Rear brake disc worn, pitted or scored, but not seriously weakened badly scored and lipped (3.5.1i)
Nearside Front Direction indicator incorrect colour white (1.4.A.2f)
Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush (2.4.G.2)
Offside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush (2.4.G.2)
Rear brake disc worn, pitted or scored, but not seriously weakened badly scored and lipped (3.5.1i)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Front Tyre worn close to the legal limit on limit (4.1.E.1)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear Trailing arm has excessive play in a pin/bush (2.4.G.2)
Offside Rear Trailing arm has excessive play in a pin/bush (2.4.G.2)
Nearside Front Tyre worn close to the legal limit on limit (4.1.E.1)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
clutch pedal rubber missing
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nail in offside front tyre
clutch pedal rubber missing
Windscreen washer provides insufficient washer liquid (8.2.3)
Brake pedal has insufficient reserve movement (3.3.A.5)
How Reliable is the Ford Focus C-max?
Based on 1,326,487 MOT tests across 79,932 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EO06 ZWU is a 2006 Ford Focus C-max in Silver with a 1,753cc diesel engine. This vehicle has been through 33 MOT tests with a personal pass rate of 57.6%.
Across all 2006 Ford Focus C-max models, the average MOT pass rate is 73.4% with a typical mileage of 70,386 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Focus C-max fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 67,238 recorded failures. If you're considering buying EO06 ZWU, it's worth having these areas checked by a mechanic before committing.
The Ford Focus C-max typically stays on UK roads for around 23 years. At 20 years old, this Ford Focus C-max is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of EO06 ZWU?
You can check the full history of EO06 ZWU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EO06 ZWU registered?
EO06 ZWU is a 2006 Ford Focus C-max, first registered on 21 March 2006.
Is EO06 ZWU safe to buy?
The MOT history for EO06 ZWU shows 33 tests with a 57.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EO06 ZWU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EO06 ZWU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.