2010 Toyota Prius

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Central Rear Seat belt anchorage loose stalk (7.1.1 (b))

Nearside Front Vehicle Identification Number has more than one different number displayed door (0.2 (c))

Nearside Rear Seat belt anchorage loose stalk (7.1.1 (b))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Play in steering rack inner joint(s) ()

Offside Play in steering rack inner joint(s) ()

Nearside Front Seat belt anchorage loose stalk (7.1.1 (b))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Brake pipe excessively corroded next to fuel tank (1.1.11 (c))

Offside Headlamp aim too low (4.1.2 (a))

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure outer sidewall (5.2.3 (d) (ii)) DANGEROUS

Nearside Play in steering rack inner joint(s) ()

Offside Play in steering rack inner joint(s) ()

Offside Rear Brake load sensing valve linkage defective and function impaired (1.1.17 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output both front (4.1.4 (b))

Nearside Front Outer Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Tyre worn close to legal limit/worn on edge four of them just about 1.6 (5.2.3 (e))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Position lamp not working (4.2.1 (a))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps both (4.7.1 (b) (ii))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Offside Rear Inner wall cut

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too low (1.8)

Offside Rear Inner wall cut

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Headlamp aim too low (1.8)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp not working on dipped beam (1.7.5a)