2012 Honda Cbr 125 R-c

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Brake disc contaminated (1.1.14 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Front Shock absorber has a reduced damping effect (5.3.2 (b))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Brake lever is short but brake can still be readily applied front brake lever broken (1.1.2 (d))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Nearside Shock absorber has a serious fluid leak (5.3.2 (b))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Rear view mirrors loose

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Headlamp aim too high (4.1.2 (a))

Front Brake disc contaminated (1.1.14 (b))

Front Brake pad(s) contaminated (1.1.13 (b))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Headlamp aim too high (4.1.2 (a))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Brake caliper inadequately mounted (1.1.16 (c) (i))

Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Clutch lever bent (6.2.7 (b))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Offside Handlebar deformed but serviceable (2.2.1 (c) (i))

Wheel alignment slightly misaligned (2.4 (a))

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Upper Rear suspension bush has slight free play (2.4.A2a(i))

Headlamp aim too high (1.6)

Rear Roller brake test indicates a slightly juddering brake (3.3.A1b)

Drive chain excessively loose (6.2.1d)

Front Roller brake test indicates a severely juddering brake (3.3.A1b)

Front Wheel has an excessively eccentric bead rim. (4.2.2)

Inner Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Drive chain worn but not considered excessive (6.2.1e)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Roller brake test indicates a slightly juddering brake (3.3.A1b)

Rear Tyre worn close to the legal limit (4.1.3(ii))