2012 Yamaha Ybr 125

Front Tyre has a tear caused by separation or partial failure of its structure sidewalls perished and tyre has opened up (5.2.3 (d) (ii)) DANGEROUS

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Wheel alignment incorrect which adversely affects the steering (2.4 (a))

Headlamp aim unable to be tested no dip beam (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Rear Direction indicator adversely affected by the operation of another lamp does not flash (4.4.3 (b))

Rear Brake grabbing severely (1.2.1 (c))

Rear Drive chain sprocket worn to excess excess wear in cush drive (6.1.7 (c) (i))

Front Tyre has a tear caused by separation or partial failure of its structure sidewalls perished and tyre has opened up (5.2.3 (d) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Tyre cracking on side walls

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Forks insecure (2.2.2 (d) (i))

Front Brake lever insecure Lock nut missing (1.1.2 (e) (i))

Headlamp aim not tested (4.1.2 (b))

Position lamp not working Head and dip light (4.2.1 (a))

Rear Brake component insecure Brake anchor locking pin missing (1.1.21 (c))

Rear Brake grabbing severely (1.2.1 (c))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Rear Wheel alignment incorrect which adversely affects the handling Adjuster lock nuts insecure (2.4 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Tyre cracking on side walls

Steering headbearing has slight free play (2.2.2 (f) (i))

Brake lever is bent but brake can still be readily applied front brake (3.1.3c)

Clutch lever bent (6.2.1g)

Drive chain slightly loose (6.2.1d)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Drive chain excessively loose (6.2.1d)

Headlamp aim too high (1.6)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))