2001 Piaggio Px 125 (vespa)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front wheel bearings have slight free play (2.3.5b)

Headlamp aim too low (1.6)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front wheel bearings have slight free play (2.3.5b)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Oil leak

Steering headbearing has slight free play (2.2.2)

Front Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Steering headbearing has excessive free play (2.2.2)

Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Handlebar mounting excessively deteriorated (flexible type) (2.1.1d)

Front Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front mudguard insecure (2.3.7)

Front suspension assembly excessive wear or free play in a front suspension component (2.3.4)

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front mudguard insecure (2.3.7)

Front suspension assembly excessive wear or free play in a front suspension component (2.3.4)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front mudguard insecure (2.3.7)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))