2005 Fiat Panda

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Oil leak, but not excessive drive shaft seal (8.4.1 (a) (i))

Offside Front Oil leak, but not excessive drive shaft seal (8.4.1 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Oil leak, but not excessive drive shaft seal (8.4.1 (a) (i))

Offside Front Oil leak, but not excessive drive shaft seal (8.4.1 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Nearside Front Oil leak, but not excessive drive shaft seal (8.4.1 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Oil leak, but not excessive drive shaft seal (8.4.1 (a) (i))

Offside Front Headlamp aim too high and too far to the right. (4.1.2 (a))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Front Items removed from driver's view prior to test ()

Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Front Service brake binding but not excessively BOTH SIDES (1.2.1 (f))

Nearside Front Tyre worn close to legal limit/worn on edge 155//80/13 (5.2.3 (e))

Coil spring corroded both rears (5.3.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension arm pin or bush worn but not resulting in excessive movement both fronts (5.3.4 (a) (i))

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Suspension arm has slight play in a pin/bush both fronts (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Suspension arm has slight play in a pin/bush both fronts (2.4.G.2)

Suspension arm corroded but not seriously weakened both rear lower arms (2.4.G.1)

Tyre worn close to the legal limit both rears (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

oil leak

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Headlamp aim too high (1.8)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Parking brake lever has little reserve travel (3.1.6b)

oil leak

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

nearside front wheel trim damaged causing sharp edge

Tyre tread depth below requirements of 1.6mm (4.1.E.1)