MOT Status
ValidMileage
62,682 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Nail in tyre ()
Rear Suspension component mounting prescribed area is corroded but not considered excessive Spring seat cups. (5.3.6 (a) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Service brake lagging in operation (1.2.1 (d))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Nail in tyre ()
Rear Suspension component mounting prescribed area is corroded but not considered excessive Spring seat cups. (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))
Offside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))
Nearside Brake pipe excessively corroded front to rear (1.1.11 (c))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength shock absorber spring cup (5.3.6 (a) (i))
Offside Brake pipe excessively corroded front to rear (1.1.11 (c))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength shock absorber spring cup (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))
Offside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))
Windscreen wiper not working (3.4 (a))
Nearside Front Brake pipe corroded, covered in grease or other material to rear (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Tyre slightly damaged/cracking or perishing 165/60/14 (5.2.3 (d) (ii))
Offside Front Brake pipe corroded, covered in grease or other material to rear (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Headlamp aim too high (1.8)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Hyundai I10?
Based on 2,829,935 MOT tests across 251,032 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EO63 XWY is a 2013 Hyundai I10 in Silver with a 1,248cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 62.5%.
Across all 2013 Hyundai I10 models, the average MOT pass rate is 78.1% with a typical mileage of 35,671 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Hyundai I10 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 15,951 recorded failures. If you're considering buying EO63 XWY, it's worth having these areas checked by a mechanic before committing.
The Hyundai I10 typically stays on UK roads for around 18 years. At 13 years old, this Hyundai I10 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of EO63 XWY?
You can check the full history of EO63 XWY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EO63 XWY registered?
EO63 XWY is a 2013 Hyundai I10, first registered on 26 September 2013.
Is EO63 XWY safe to buy?
The MOT history for EO63 XWY shows 16 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EO63 XWY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EO63 XWY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.