1981 Austin Morris Mini 95L

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

front body mount bushes have slight play

n,s,r radius arm movement slightly stiff

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

front body mount bushes have slight play

n,s,r radius arm movement slightly stiff

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Seat belt damaged but webbing not significantly weakened (5.2.2a)

Offside Front Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Front Upper Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Seat belt damaged but webbing not significantly weakened (5.2.2a)

Nearside Front Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Subframe mounting prescribed area is excessively corroded floor (2.4.A.3)

Offside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Subframe mounting prescribed area is excessively corroded floor section (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded front panel holed (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded above subframe mounting (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded floor (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded floor to sil seam holed/split (5.2.6)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front inner arch front of sil holed by corrosion

Nearside Seat belt damaged but webbing not significantly weakened (5.2.2a)

Offside Front Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Front Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Seat belt damaged but webbing not significantly weakened (5.2.2a)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Driver's door cannot be opened from inside the vehicle (6.2.B.1b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Lower Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too high (1.8)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Brake pedal anti-slip provision missing (3.3.A.1b)

Brakes imbalanced across an axle (3.7.B.5b)

Electrical wiring inadequately supported (1.9.2a)

Nearside Front Steering rack gaiter insecure (2.2.D.2d)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Steering rack gaiter split (2.2.D.2d)

Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

front brake application uneven (3.7.B.2)

Nearside Front wheel bearing has excessive play (2.5.A.3c) DANGEROUS

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Direction indicators not working (1.4.A.2c)

Driver's seat cannot be secured in the upright position. (6.2.A.2)

Hazard warning switch faulty (1.4.B.1d)

Nearside Passenger's seat insecure (6.2.A.1)

Nearside Steering rack gaiter split (2.2.D.2d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Headlamp aim too low (1.8)

Rear fog lamp missing (1.3.2a)

Rear fog lamp switch missing (1.3.1a)

Rear fog lamp tell tale missing (1.3.1b)

n/s/f rear ,front subframe mount poor

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Front wheel bearing rough when rotated (2.5.A.2)

Nearside Front Lower Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Front Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Upper Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Rear Exhaust system not adequately supported (7.1.1)

n/s/f rear ,front subframe mount poor

Exhaust engine idle speed too high (7.3.A.2a)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Hazard warning tell tale not working correctly (1.4.B.1e)

Indicator tell tale inoperative (1.4.A.2a)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front Upper Seat belt insecurely fixed to the vehicles structure (5.2.1a)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Rear wheel bearing has excessive play (2.6.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear fog lamp not working (1.3.2b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Registration plate lamp not working (1.1.5c)

Windscreen washer provides insufficient washer liquid (8.2.3)

front brake application uneven (3.7.B.2)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Brake pedal pad not secure to the pedal (3.3.A.1c)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Rear Exhaust system not adequately supported (7.1.1)

co reading too low