MOT Status
ExpiredMileage
110,294 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch area (6.1.B.2)
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings suspension mounting (6.1.B.2)
Offside Rear Brake pipe excessively corroded oF the front to rear pipe (3.6.B.2c)
Offside Outer Vehicle structure has slight corrosion sill area (6.1.B.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Front suspension has excessive play in a track control arm inner bush (2.5.B.2b)
Nearside Headlamp aim too high (1.8)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Front Bonded suspension unit deteriorated and cannot function as intended (2.4.F.3)
Offside Front Bonded suspension unit deteriorated and cannot function as intended (2.4.F.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp aim too low and too far to the right. (1.8)
Offside Headlamp aim too low and too far to the right. (1.8)
Offside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Nearside Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.B2)
Offside Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.B2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EP03 BTU is a 2003 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 55.6%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying EP03 BTU, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of EP03 BTU?
You can check the full history of EP03 BTU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EP03 BTU registered?
EP03 BTU is a 2003 Ford Ka, first registered on 18 July 2003.
Is EP03 BTU safe to buy?
The MOT history for EP03 BTU shows 18 tests with a 55.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EP03 BTU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EP03 BTU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.