2003 Ford Ka

Suspension arm rubber bush deteriorated but not resulting in excessive movement both front arm rear bushes (2.4.G.2)

Vehicle structure has slight corrosion both rear chassis rails (6.1.A.1)

Body has slight corrosion floor (6.1.B.2)

Body has slight corrosion ns and os sills (6.1.B.2)

Suspension arm rubber bush deteriorated but not resulting in excessive movement ns and os (2.4.G.2)

Trailing arm rubber bush deteriorated but not resulting in excessive movement ns and os (2.4.G.2)

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear inner arch (6.1.B.2)

Body has slight corrosion floor (6.1.B.2)

Body has slight corrosion ns and os sills (6.1.B.2)

Offside Body has slight corrosion (6.1.B.2)

Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Body has slight corrosion (6.1.B.2)

Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Advise Corrosion to rear brake junction but is acceptable at this time.

Advise Heavy corrosion to Rear chassis by exhaust mount but is not by a structual part.

Advise Heavy cracking to N/S/R Tyre and is only just acceptable.

Advise Heavy surface corrosion to N/S/F and O/S/F Sills but are not holed at this time.

Advise O/S/R Tyre is worn close to the legal limit of 1.6mm.

Advise all welding has been heavilly undersealed.

Advise slight exhaust blow which is only just acceptable.

Advise surface corrosion to front chassis by suspension mounts but is not holed at this time.

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Wheel nut(s) missing (4.2.A.1e)

Nearside Rear Wheel nut(s) missing (4.2.A.1e)

Offside Front Wheel nut(s) missing (4.2.A.1e)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Wheel nut(s) missing (4.2.A.1e)

Offside Front Steering locking device missing (2.2.C.1g) DANGEROUS

Advise Corrosion to rear brake junction but is acceptable at this time.

Advise Heavy corrosion to Rear chassis by exhaust mount but is not by a structual part.

Advise Heavy cracking to N/S/R Tyre and is only just acceptable.

Advise Heavy surface corrosion to N/S/F and O/S/F Sills but are not holed at this time.

Advise O/S/R Tyre is worn close to the legal limit of 1.6mm.

Advise all welding has been heavilly undersealed.

Advise slight exhaust blow which is only just acceptable.

Advise surface corrosion to front chassis by suspension mounts but is not holed at this time.

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Advise Corrosion to rear brake junction but is acceptable at this time.

Advise Heavy surface corrosion to N/S/F and O/S/F Sills but are not holed at this time.

Advise N/S/F Lower suspension arm front bush is deteriorated but is not resulting in excessive movement.

Advise O/S/R Tyre is heavilly worn on the inside edge and is also cracking but is acceptable.

Advise heavy corrosion to rear chassis by exhaust mount but is not by a structual part.

Advise slight binding to O/S/F Wheel.

Advise slight splitting to O/S/F Wiper blade.

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

advise cracking on rear tyres

advise o/s/f head light on lower limit

advise power steering corrosion

Exhaust system not adequately supported (7.1.1)

Nearside Front Headlamp aim too low (1.8)

Rear Registration plate lamp not working (1.1.C.1d)

advise cracking on rear tyres

advise o/s/f head light on lower limit

advise power steering corrosion

Coolant Bottle Damaged

Corrosion Present Around Fuel Filler Cap

Front To Rear + Rear Brake Pipes Greased

An item not tested (Manual)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Coolant Bottle Damaged

Corrosion Present Around Fuel Filler Cap

Front To Rear + Rear Brake Pipes Greased

N/S/R Body Kit Insecure

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front coil spring fractured (2.4.C.1a)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear coil spring fractured (2.4.C.1a)

Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)