MOT Status
ExpiredMileage
93,545 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Vehicle structure has slight corrosion (6.1.A.1)
Offside Front Vehicle structure has slight corrosion (6.1.A.1)
Offside Rear Upper Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Upper Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Vehicle structure has slight corrosion (6.1.B.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Vehicle structure has slight corrosion (6.1.A.1)
Offside Front Vehicle structure has slight corrosion (6.1.A.1)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear Upper Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Upper Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Vehicle structure has slight corrosion (6.1.B.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Front Macpherson strut has slight movement at the upper attachment both sides (2.5.A.1c)
Front Macpherson strut has slight movement at the upper attachment both sides (2.5.A.1c)
Nearside Side repeater not working (1.4.A.2c)
Offside Stop lamp not working (1.2.1b)
Rear Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Rear Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Rear Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Rear Registration plate lamp not working (1.1.C.1d)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Side repeater not working (1.4.A.2c)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Stop lamp not working (1.2.1b)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
n/s/r tyre poor con dition
o/s/r tyre outer edge cracking poor condition
Nearside Headlamp aim too low (1.8)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear position lamp(s) not working (1.1.A.3b)
Nearside Rear Brake pipe leaking (3.6.A.1)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Brakes imbalanced across an axle (3.7.B.5b)
Offside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
ET03 BUF is a 2003 Ford Ka in Silver with a 1,299cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 60%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying ET03 BUF, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of ET03 BUF?
You can check the full history of ET03 BUF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was ET03 BUF registered?
ET03 BUF is a 2003 Ford Ka, first registered on 11 July 2003.
Is ET03 BUF safe to buy?
The MOT history for ET03 BUF shows 20 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does ET03 BUF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on ET03 BUF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.