2003 Ford Ka

Nearside Front Macpherson strut pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))

Nearside Front Suspension arm pin or bush excessively worn all bushes (5.3.4 (a) (i))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Macpherson strut pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Windscreen washer not working (3.5 (a))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement all bushes (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Body has slight corrosion side skirt (6.1.B.2)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)

Offside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings side skirt (6.1.B.2)

Offside Front Body has a sharp edge caused by damage (6.1.C.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Body has slight corrosion side skirt (6.1.B.2)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

both outer sills corroded

clutch slipping

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

n/s/f tyre uneven wear

Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Offside Rear coil spring cracked (2.4.C.1a)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

n/s/f tyre uneven wear

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Direction indicators slightly discoloured (1.4.A.2f)

n/s outer sill corroding

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Offside Outer Seat belt anchorage prescribed area is severely distorted (5.2.6)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Direction indicators slightly discoloured (1.4.A.2f)

n/s outer sill corroding

Brakes imbalanced across an axle (3.7.B.5b)

Offside Headlamp not working on dipped beam (1.7.5a)

Rear fog lamp emits a light other than red (1.3.2e)

both outer sills corroding

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Nearside Outer Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)