2003 Mitsubishi Space Star

Brake lever has insufficient reserve travel (1.1.2 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt insecure (6.1.7 (g) (ii))

Nearside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Anti-roll bar linkage ball joint dust cover severely deteriorated both (5.3.4 (b) (i))

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Track rod end ball pin shank loose (2.2.B.1c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement both sides (2.4.G.2)

Nearside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front constant velocity joint is insecure (2.5.C.1b)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Body has a sharp edge caused by damage (6.1.C.1)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

o/s/f door mirror cracked within the limit.

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

o/s/f door mirror cracked within the limit.

Air bag light on

Nearside rear tyre worn on edges

Nearside wiper has small split

Offside mirror cracked

nearside rear tyre wearing on the inner edges

offside front wing mirror slightly cracked

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside front mirror is slightly cracked but the rear view is not adverely affected.

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.B2)

Offside Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.B2)