MOT Status
ExpiredMileage
79,035 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake servo defective or ineffective loose on mountings (1.1.10 (a) (i))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner arch end of sill (5.3.6 (a) (i))
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner arch end of sill (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Brake pedal pivot has slight wear or free play borderline (1.1.1 (b))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement inner bushes (5.3.4 (a) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive flooring /subframe mounting area (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement inner bushes (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive flooring /subframe mounting area (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing cracking in tread (5.2.3 (d) (ii))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor pan (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive silll (5.3.6 (a) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor pan (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor pan (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive silll (5.3.6 (a) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor pan (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front (5.3.4 (a) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
both inner sills are starting to rust at rear
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front (5.3.4 (a) (i))
both inner sills are starting to rust at rear
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear tyre worn on inner edge
Offside Stop lamp not working (1.2.1b)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
ET06 BXE is a 2006 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 70.6%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying ET06 BXE, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of ET06 BXE?
You can check the full history of ET06 BXE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was ET06 BXE registered?
ET06 BXE is a 2006 Ford Ka, first registered on 20 July 2006.
Is ET06 BXE safe to buy?
The MOT history for ET06 BXE shows 17 tests with a 70.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does ET06 BXE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on ET06 BXE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.